|
Tangential Chasers
MPTPL manufactures Tangential
Chasers for external threading of components which are hard to
roll such as Big Bolts or Fasteners or Pipes. These Chasers are
suitable for Landis, Lanco, Landmatic, Gents and Wagner type die
heads used for threading of fasteners and pipes.
MPT Chasers are made for all
Threading Standards and Die Head Sections in 4 piece and 6 piece
sets. The Chasers are usually made from HSS-M2 Steel. MPT
Chasers have accurate Thread Profile and Correct Parameters with
respect to FITTING and SETTING on Dieheads.
MPT Chasers are made for all
thread standards viz. METRICS (Pitch 0.5mm-5.0mm), UNIFIEDS
(8tpi-40tpi), and IMPERIALS (5tpi-40tpi).
Chasers to thread special profiles
and ACME type threads are also made as per requirement.
INFORMATION REQUIRED FOR ORDERING
HSS TANGENTIAL CHASERS:
1.
SECTION (Length, Thickness
and Width of Chasers)
2.
THREAD PITCH ALONG STANDARD
3.
DOVETAIL DIMENSIONS
(Dovetail Width & Thickness)
4.
THROAT SIZE AND ANGLE
5.
TYPE OF OPERATION
(Threading on RODS or BOLTS or ON PIPES)
|
